High voltage low voltage prefabricated substation
Product overview
      YBM-12/0.4 series prefabricated European substation is used as a small and medium-sized independent substation in 6-10kV, 50Hz power distribution system. As a 6-10/0.4kV step-down station, the general capacity is below 1250kVA, suitable for factories, Use in mines, ports, stations, residential quarters and underground facilities. With a small footprint and flexible mobility, it can penetrate the load center, adjust the power supply radius, save energy and reduce consumption, and is well received by users.
      Normal use condition
      ●Ambient temperature: upper limit +45C, lower limit -35C
      ●Relative humidity is not more than 90%
      ●Altitude does not exceed 2500m
      ●Ice coating does not exceed 10mm
      ●Wind speed does not exceed 34m/s
      ●Earthquake intensity does not exceed 8
      ●Installation inclination not exceeding 5 degrees
      ●No fire and explosion hazard, serious pollution, chemical corrosion and severe vibration
Product Features
      Only plasticity is very strong. The structure is divided into three independent units: a high pressure chamber, a variable pressure chamber and a bottom pressure chamber, arranged in a "good" shape or a "mesh" shape.
      The outer casing can be made of stainless steel, aluminum-zinc plate, color steel plate, aluminum alloy and pressed concrete. The shape and color can be negotiated with the user, which makes it natural.
      The optional parts for the high pressure section are Schneider SM6 and SC6. ABB's SafeRing and Uniswitch and our company's XGN-12 various SF load switchgear, direct-empty circuit breaker cabinets, and vacuum load switchgear. The high pressure part can be large or small, and can even be an opening and closing station.
      The transformer can be oil immersed or dry.
      The low pressure part can be panel type, fixed type and drawer type.